 |
silvereagle
Cruiser Addict
Posted: Dec 27, 2007, 3:12 PM
Post #1 of 4
(228 views)
Shortcut
|
|
Question about codes.
|
Can't Post
|
|
A friend of mine did a test of his codes and one came up 0344 ,now the qustion is, what is it. One of the codes said something about loose catalyst.The car has an awful miss and back fires,He changed the plugs and the coil and the wires last year so he has no Idea what it could be. It's a stick and non turbo.
----------
big jim
|
|
Posts: 866 | From: New Castle ,Del, USA
| Registered: Aug 6, 2002, 12:00 AM
|
|
| |
|
Dream 4
Cruiser Expert
Posted: Dec 28, 2007, 2:44 PM
Post #2 of 4
(215 views)
Shortcut
|
|
Re: [silvereagle] Question about codes.
|
Can't Post
|
|
Quote:
A friend of mine did a test of his codes and one came up 0344 ,now the qustion is, what is it. One of the codes said something about loose catalyst.The car has an awful miss and back fires,He changed the plugs and the coil and the wires last year so he has no Idea what it could be. It's a stick and non turbo.
Cut & pasted from the Chrysler shop manual, I have heard of quite a few Camshaft Position Sensors going bad on older/high mileage PTs, item 6 in the list of possible causes and they are pretty cheap and easy to install:
Symptom:
P0344-CAMSHAFT POSITION SENSOR INTERMITTENT
When Monitored and Set Condition:
P0344-CAMSHAFT POSITION SENSOR INTERMITTENT
When Monitored: Engine running or Cranking.
Set Condition: When the failure counter reaches 20. One Trip Fault.
POSSIBLE CAUSES
GOOD TRIP EQUAL TO ZERO
WIRING HARNESS INSPECTION
(K7) 5 VOLT SUPPLY CIRCUIT OPEN OR SHORTED TO GROUND
TONE WHEEL/PULSE RING INSPECTION
CHECKING CKP SIGNAL WITH THE DRBIIIt LAB
CAMSHAFT POSITION SENSOR
(K44) CMP SIGNAL CIRCUIT OPEN
(K44) CMP SIGNAL CIRCUIT SHORT TO GROUND
(K44) CMP SIGNAL CIRCUIT SHORTED TO B+
(K44) CMP SIGNAL CIRCUIT SHORT TO (K7) 5 VOLTS
PCM
----------
'05 GT Dream Cruiser Series 4. No.1109
My Mods
PT Trailer Project
Our PTs
|
|
Posts: 227 | From: Annapolis,MD
| Registered: Oct 24, 2005, 5:15 PM
|
|
| |
|
silvereagle
Cruiser Addict
Posted: Dec 28, 2007, 3:03 PM
Post #3 of 4
(212 views)
Shortcut
|
|
Re: [Dream 4] Question about codes.
|
Can't Post
|
|
Thanks for the information. I called my friend and e-mailed him the information. Now all he has to do is find out where the part goes..
----------
big jim
|
|
Posts: 866 | From: New Castle ,Del, USA
| Registered: Aug 6, 2002, 12:00 AM
|
|
| |
|
SmittysPT
Cruiser Veteran
PT Cruiser Club Member
Posted: Dec 29, 2007, 9:18 PM
Post #4 of 4
(191 views)
Shortcut
|
|
Re: [silvereagle] Question about codes.
|
Can't Post
|
|
Driver side on end of head. Easy to change
----------
Jack Smith (Smittys PT)
Webmaster
Colorado Cruiser Club
|
|
Posts: 2738 | From: Colorado Rockies
| Registered: Mar 22, 2001, 12:00 AM
|
|
| |
|
|
Specials |
 |
|
MAIN
SEARCH
WHO'S
LOG 
